Creating arrays

10 Type the correct value for the drive capacity reserve (percentage), then press ENTER. The Sub-Array Selection screen opens.

The controller displays the number of available sub-arrays you can choose from. In this example, the first one is a single sub-array that provides nine data drives and one parity drive, and the second example is two sub-arrays that provides two four-drive sub-arrays with one parity drive.

When you create a redundant array, such as a RAID 5 or 50 type, you will always be creating at least one sub-array comprised of the data drives and one parity drive. When a sufficient number of drives have been selected you can choose to make multiple sub-arrays of your array. This provides the benefits of a quicker recovery from a drive failure since only one of the smaller sub-arrays is affected.

Tips & Tricks If this is just one single array with less than five hard drives, choose the default of one sub-array.

www.gateway.com

33