Gateway 840 VT-100 36

Creating arrays

7 Select the desired chunk size from the menu, then press ENTER. The Drive Selection Menu opens.

8 Select the drives for the new array by doing the following:

The controller will list all the available drives for each attached enclosure(s). You can choose to add a drive to the array by highlighting the drive, then pressing the U key. Or you can select all the available drives by pressing the A key. Remove a drive that has been selected by pressing the R key, or remove all of the drives selected by pressing the C key.

Tips & Tricks	If you have multiple enclosures, the enclosure you are
	viewing is displayed at the top of the page. To move to the
	drives in the next enclosure, highlight the last drive in the
	column or row and press the right or down arrow key.