Gateway 840 VT-100 manual 185

Chapter 9: Event Logs

Controller Event Messages	Description	Cause	Action
Controller x	The specified controller has	Failure or removal	Replace the
Failed/Removed	been removed, or has failed.	of one controller	controller.
	Message is generated by the	(partner) in an
	partner controller.	Active-Active
		configuration.
Controller x Timeout	The specified controller has	Failure or removal	Replace the
	not responded in the allotted	of one controller	controller.
	time. Message is generated	(partner) in an
	by the partner controller.	Active-Active
		configuration.
Controller x Present	The specified controller has	Partner controller	No action
	been inserted.	has been inserted.	necessary.
Controller x Valid	The specified controller has	Partner controller	No action
	passed its selftest and is	is ready to fail	necessary.
	now ready (failback).	back.
Controller Failover Started	The process of failing over to	Failure or removal	No action
	the remaining controller has	of the partner	necessary.
	started.	controller.
Controller Failover	The process of failing over to	Completion of	No action
Completed	the remaining controller has	failover process.	necessary.
	completed.
Controller Failback Started	The process of failing back	Partner controller	No action
	to a replacement controller	started failback.	necessary.
	has started.
Controller Failback	The process of failing back	Completion of	No action
Completed	to a replacement controller	failback process.	necessary.
	has completed.
Controller Powered On	The controller has been	The controller was	No action
	powered on or reset.	powered on.	necessary.
Controller Powered Off	The controller has been	Removal of	No action
	powered off or removed.	controller or	necessary.
		power.
Controller Reset	The controller has been	User initiated a	No action
	reset either locally or	controller reset.	necessary.
	remotely.

180 www.gateway.com