2.Remove 2 Phillips mounting screws.
3.Pull out the motor.
4.Disconnect the wire connectors.
5.Remove the drive fork and nut.
Solenoid Mounting Screws
Motor
Mounting
Screws
GEA00919
6. Disconnect the motor wiring connectors.
Wiring
Connectors
6.Disconnect the wire connectors.
Solenoid
Ground
Wire
Motor
GEA00695
7.Remove 2 solenoid mounting screws.
8.Slide the solenoid out of the housing.
Evaporator
Air is driven across the evaporator coils to produce cold air for the freezer and fresh food compartments. Evaporator is replace like previous models.
1.Complete steps 4 and 5 in the Evaporator Fan procedure.
GEA00892
Screw
7.Remove 3 motor mounting screws.
8.Remove the motor from the housing.
Ice Cube Solenoid
The ice cube solenoid energizes when the cube mode is selected on the dispenser control panel.
1.Remove the ice dispenser tray and assembly (see page 21).
2.Remove 2 Phillips mounting screws.
3.Pull out the motor.
4.Disconnect the wire connectors.
5.Remove the ground wire to the ice cube solenoid.
GEA00893
2.Remove 3 Phillips screws from the evaporator mounting.
3.Cut the capillary and suction line.
4.Remove the evaporator.
– 26 –