Installation Instructions

3ELECTRICAL CONNECTIONS (CONT.)

BUsage Situations where Appliance Power Cord will be Disconnected Frequently.

Do not use an adapter plug in these situations because disconnecting of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. The customer should have the 2-prong wall receptacle replaced with a three-prong (grounding) receptacle by a qualified electrician before using the appliance.

The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes.

Electric Disconnect

Locate disconnect plug on the range back.

Pinch sides of connector and pull out of range back.

4SEAL THE OPENINGS

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

5ASSEMBLE SURFACE BURNERS

AAssemble the side burners as shown.

Side

Grate

Burner cap

Burner head

Electrode

BAssemble the center burner. Make sure that the locking feet on the center grate hook over the side grates.

Center Grate

Locking

Foot

Burner head

Locking

and cap

Foot

assembly

 

Electrode

CAUTION: Do not operate the burner without all burner parts in place.

Medium burner

 

 

Medium burner

head and cap

Oval head and cap head and cap

 

 

assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front of range

 

 

 

 

Medium burner

Medium

 

burner

head and cap

head and cap

Place the burner heads and caps on the cooktop. Make sure that the heads and caps are placed in the correct locations. There is one oval (center) head and cap assembly and four medium (side) heads and caps.

Slot

Slot

Electrode

Make sure the slot in the burner head is positioned over the electrode.

35

Page 35
Image 35
GE JGBS10, JGBS09 manual Seal the Openings, Assemble Surface Burners, Electric Disconnect