Installation Preparation

STEP 2 MOVE THE RANGE INDOORS

1 Tilt the range forward on the skid.

Toekick

2 Lift the toekick out of the foam base.

Toekick

3 Drive the blade of the hand-truck beneath the foam block.

Insert Blade Under

the Foam Block

You may need to remove the front of the foam block to fit through the doorway.

IMPORTANT: Do not remove the base foam block while the hand-truck is in use. Place the hand-truck blade underneath the base foam block and transport the range to the final location.

4 Attach the hand-truck straps around the unit.

IMPORTANT: Place the hand-truck straps below the oven door handles. To avoid damaging the side panels, place a pad between the hand-truck and the range.

5 Tilt the range to lower the hand-truck wheels off the skid.

Hand-Truck

Straps Below

Oven Door

Handles

6 Place the appliance runners on the floor

at the left and right sides in front of the opening.

IMPORTANT: The runners provide a surface for rolling the range into the final position and will protect the floor finish. The runners must be removed before leveling the range.

7 Move the range indoors. Position the range in front of the installation location, onto the runners.

Range

Opening

Runners

for Rolling the Range into Position

12