Installation
•Install the toekick after the range has been leveled.
•Measure the distance between the floor and the bottom of range.
•Loosen the two screws on each end. Adjust
the toekick height by sliding the upper and lower pieces apart to 1/8" less than the measured height.
•Secure the top and bottom sections by tightening the 2 screws on each end.
•Push toekick against range leg until clip snaps to legs.
NOTE: Be sure the toekick snaps securely to the leg.
Top of
Toekick
Bottom | Screw |
of Toekick |
|
Push
Push
17