Fixed Print Adjust

This method sets the gap and fine tunes it at the same time. This method is recommended for forms of varying thickness such as shipping notices and envelopes. The range of the fixed gap is from 0.3 to 8.6. A selection of 1.0 is the best for single part 20lbs. (75 g/m2). A selection of 6.0 is the best lightweight 6-part forms. Higher selections should be used for heavier or higher part count forms.

FORM: FIXED

ENTER

FORM:FIXED>0.6

↓ or ↑

This fixed gap value will be stored as a "path" parameter or as a "format" parameter based upon the GAP ASSIGN selection in the System Menu.

If GAP ASSIGN:PATH is selected in the System Menu, then the fixed gap value will be stored for the currently selected path and will be recalled the next time paper is loaded in the current path.

If GAP ASSIGN:FORMAT is selected in the System Menu, then the fixed gap value will be stored in the current format. You must then save the current format to a numbered (1-4) format. Then, the next time that particular format number is selected, the offset gap value will be recalled.

Go back to the top level of the menu with the PRIOR key and press the ↓ key to select the next menu item (EMULATION displays).

99