Selecting the Line Setup

Select line setup as shown below.

LINE SETUP

To change the line setup, press the ENTER key to go from the top level to the second level as shown below. There are three line setup selections:

Left Margin

Select the left margin (up to 13.4 inches) in CPI or in inches depending upon System Menu (PROGRAM UNITS). The maximum left margin value is RM-1.

LINE SETUP

ENTER

LINE: LEFT MARGIN

LINE:LM>0

↓ or ↑

Right Margin

Select the right margin (no less than 2 inches) in CPI or in inches depending upon System Menu (PROGRAM UNITS). The minimum right margin value is LM+1.

LINE: RGHT MARGIN

ENTER

LINE:RM>136

↓ or ↑

Left Reference

 

Select the left print reference (up to 0.5 inch) in CPI (unit: 1/120 inch. Range 0-60) or in inches depending upon System Menu (PROGRAM UNITS). Max. = 0.5 inch

LINE: LEFT REF

ENTER

LINE:LREF>0/120

↓ or ↑

Go back to the top level of the menu with the PRIOR key and press the ↓ key to select the next menu item (PRINT MODES displays).

92