Loading Paper Using the Front1 Push Tractor Assembly and the Rear Pull Tractor Assembly (Option)
Once the Rear Pull tractor assembly is installed, the fanfold paper can be loaded only in Push- Pull mode using the Front1 Push tractor and the Rear Pull tractor assemblies (the Front 1 led is turned on.)
1.Load the fanfold paper on the Front1 Push tractor assembly following the sequence Loading Paper Using the Front1 Tractor Assembly described before.
2.Take up the slack of the paper exiting
from the rear paper slot and open the left and right tractor set covers. Unlock the tractor sets moving the levers up.
3. Rotate the tractor bar to align the tractor set pins with the paper perforation. Insert the paper perforation on the left and right tractor set pins.
132