Software Driver Selection

At this point it is necessary to configure the printer for the application package. The installation procedures depend upon the host environment.

In a WINDOWS 95/98/2000® environment the printer supports the Plug & Play feature.

Install the printer driver following the instructions on the CD-Rom:

1.Insert the CD-Rom into the CD drive.

2.Select the language you prefer and press the Next => button.

3.Select Install Printer Driver, then press the Next => button.

4.Select whether the printer should be installed as a local or remote printer, then press the Next => button.

5.Press the Driver disk button.

6.Select the CD drive.

7.Select the 3850 directory, then select the environment and the language for the printer driver that should be installed. Press the OK button.

8.Select the printer port with which the printer is connected to the host.

The printer drivers of ￿￿￿￿￿￿￿ printers can be found at the Internet Address

http::////www..genicom..com//drivers//genicom..htm

13