Selecting the Path Options

Select paper path options as shown below.

PATH OPTIONS

This function will be displayed only if the optional Rear Pull tractor assembly or the optional

automatic sheet feeder (ASF) has been installed.

To change the path options, press the ENTER key to go from the top level to the second level as shown below. There are five path-feeding modes: Push, Push-Pull, ASF1(1BIN), ASF2 (2BIN), ASF3 (3BIN).

PULL/PUSH Paths

PUSH: Enables Front push path.

PSHPL: Enables Rear Pull path together with Front Push path (displayed if the optional Rear Pull tractor assembly is installed).

PATH OPTIONS

ENTER

PATH: TRACTOR

ENTER

PATH:TRACT>PUSH

↓

PATH:TRACT:PSHPL

↓

ASF Types

Informs firmware of which type of optional automatic sheet feeder bin is installed. Not affected by the Initial Set Up Menu.

PATH: ASF TYPE

ENTER

PATH:ASF>NONE

↓

PATH:ASF:1BIN

↓

PATH:ASF:2BIN

↓

PATH:ASF:3BIN

↓

Go back to the top level of the menu with the PRIOR key and press the ↓ key to select the next menu item (PATH/FORMAT displays).

75