Selecting the Page Setup

Select page setup as shown below.

PAGE SETUP

To change the page setup, press the ENTER key to go from the top level to the second level as shown below. There are five page setup selections:

Top Print Reference

When using pre-printed forms, it may be desirable to begin printing at a particular position on the first form and at the same position on successive forms. To do so, adjust the top print reference (also known as load offset).

The range is from -90/90 to +180/90 inch or from -1/+2 inches depending upon System Menu (PROGRAM UNITS).

This value affects only the currently selected paper paths.

PAGE SETUP

ENTER

PAGE: TOP REF

ENTER

PAGE:TREF>0/90

↓ or ↑

Line Spacing

Select the line spacing in lines per inch (lpi).

PAGE: LINES/INCH

ENTER

PAGE:LPI>6

↓

PAGE:LPI:4

↓

PAGE:LPI:3

↓

PAGE:LPI:2

↓

PAGE:LPI:12

↓

PAGE:LPI:8

↓

90