ETX/ACK Protocol
When set to Y, the EXT/ACK protocol is enabled. This protocol is used to verify the receipt of blocks of data sent from the host to the computer.
SER: ETX/ACK | ENTER |
SER:EXT/ACK>N | ↓ |
SER:EXT/ACK:Y | ↓ |
Robust Xon
Y: When enabled, the printer will output DC1 when buffer is empty and printer is on line.
N: Disables this function.
SER: ROBUST XON | ENTER |
SER:ROBST XON>Y | ↓ |
SER:ROBST XON:N | ↓ |
XON/XOFF Status |
|
BUFF: Reflects buffer status only.
FAULT: Reflects fault status only.
ON/BU: Reflects online and buffer status.
FA/BU: Reflects fault and buffer status.
NONE: Never output or never change from static state
ONLN: Reflects online status only.
SER: XON/XOF STAT | ENTER |
SER:XONXOF>BUFF | ↓ |
SER:XONXOF:FAULT | ↓ |
SER:XONXOF:ON/BU | ↓ |
SER:XONXOF:FA/BU | ↓ |
SER:XONXOF: NONE | ↓ |
SER:XONXOF: ONLN | ↓ |
68