On Line after Paper Load Sequence
The printer will enter the online (Y) or offline (N) condition following a paper load sequence based upon your selection.
OPT: ONLIN AT LOD | ENTER |
OPT:ONLIN LOAD>N | ↓ |
OPT:ONLIN LOAD:Y | ↓ |
Ribbon Type Selection |
|
Informs the firmware which type of ribbon is installed (not affected by ISU).
If PROCESS (process ribbon) or RED/BLK (red/black ribbon) are selected, then the printer will respond to receive color select commands.
If BLACK (black ribbon) is selected, then an automatic ribbon shift will occur if the color kit option is installed.
OPT: RIBBON TYPE | ENTER |
OPT:RBN>BLACK | ↓ |
OPT:RBN:PROCESS | ↓ |
OPT:RBN:RED/BLK | ↓ |
Printhead Gap to Path or Format Assignment
Based upon your selection the printer will save a print head gap value either to the current paper path or to the format during the print head gap setting routine in the Operational Menu. (see Adjjusting for the Thickness of Your Forms section).
If you select PATH, then the printer will establish a new gap whenever you load a new paper path.
If you select FORM, then the printer will establish a new gap whenever you select a new format or whenever you load a paper path to which a format has been assigned.
OPT: GAP ASSIGN | ENTER |
OPT:GAP TO>PATH | ↓ |
OPT:GAP TO:FORM | ↓ |
57