Selecting the Special Modes

Select the special modes as shown below.

SPECIAL MODES

To change the special mode parameters, press the ENTER key to go from the top level to the second level as shown below. There are six print mode selections:

Impact Mode

HIG: increases print wire drive pulse width. For heavier multi-part forms you may choose to select HIGH (print wire) impact mode.

LOW: decreases print wire drive pulse width. For lighter forms or for quieter printing, you may choose to select LOW impact.

SPECIAL MODES

ENTER

SPEC: IMPACT MODE

ENTER

SPEC:IMPACT>HIG

SPEC:IMPACT:LOW

Quiet Printing Mode

 

Y: Printing occurs in two passes of print head. For quieter printing (at reduced print speed) you may choose this mode (QUIET mode).

N: Printing occurs in one pass of print head.

SPEC: QUIET MODE

ENTER

SPEC:QUIET>N

SPEC:QUIET:Y

95