Selecting the Interfaces

Select the parallel and the serial interface as shown below.

INTERFACE

Press the ENTER key to go from the top level to the second level.

Selecting the Interface Types

This function allows selection of the interface types:

PARALLEL: Actives parallel interface.

SERIAL: Activates both RS232 and RS422 signals,

BOTH: The printer will respond to data on either interface.

See Interface section for interface pin and signal definitions in the Programmer’s Manual on the

CD-Rom.

INTERFACE

ENTER

I/F: TYPE

ENTER

I/F:TYPE>BOTH

↓

I/F:TYPE:PARALL

↓

I/F:TYPE:SERIAL

↓

Selecting the Interface Switching Time

This function allows selection of the automatic interface switching time. The range is from 5 to 99 seconds.

I/F: SWITCH TIME

ENTER

I/F:SWIT TIME>10

↓

Go back to the top level of the menu with the PRIOR key and press the ↓ key to select the next menu item (PARALLEL OPTIONS displays).

61