Printer Setups

The main printer setup parameters can be selected via the operator panel. The setup parameters are divided into three printer setups: the System Menu, the Operational Menu and the Initial Set-up Menu.

System Menu

Allows configuration of parameters that are not used on a day-

 

to-day basis. For example, printer response to CR code,

 

interfaces type and code page selection.

Operational Menu Allows you to set various print mode parameters that are useful in your day-to-day job. For example: font character pitch and margins (left/right and top/bottom).

As new selections are made using the System and Operational Menus, there may come a time when the condition of the printer parameters is too confusing or is not what they are expected them to be. When this happens, an Initial Setup (ISU) may be executed:

Initial Set-up Menu The main purpose of this menu is to provide the user with a way to get the printer back to a known state.

All System/Operational Menu values are restored to the factory default settings except ALIGNMENT and SENSOR TUNE functions (and RIBBON and ASF TYPE functions of the System Menu).

30