ENQ Code Enable

1: enables printer response to <ENQ> and enables type 1 download sequence.

2: enables printer response to <ENQ> and enables type 2 download sequence.

NO: printer does not respond to <ENQ> code.

See "ANSI Emulation Commands" for additional information in the Programmer’s Manual on the

CD-Rom.

ANS: ENQ CODE

ENTER

ANS:ENQ CODE>NO

ANS:ENQ CODE:1

ANS:ENQ CODE:2

Superscript/Subscript Character Enable

The printer will (Y) or will not (N) respond to ESC [2 m and ESC [3 m commands.

ANS: S/SUB SCRIPT

ENTER

ANS:S/SUB SC>N

ANS:S/SUB SC:Y

ESC+Control Code

 

In this setting the control codes imbedded within escape sequence are valid (Y) or ignored (N). In both cases, the escape sequence will be valid.

ANS: ESC+CTRLCODE

ENTER

ANS:ESC+CTRL>N

ANS:ESC+CTRL:Y

48