Error Handling
When an error condition occurs:
•the printer enters in WAIT state.
•the display will show the first message indication the error. Then, another second message will be displayed giving more specific information about the error condition.
After you have alleviated the error condition, press always the ON LINE key to reset the error
condition.
Error Message Description
| Messages | Indication | Solution |
|
|
|
|
| A.G.A NOT OPER | The automatic gap adjustment | Adjust the print head gap manually. |
| ADJUST THE GAP | (A.G.A) is not enabled. | Press the ON LINE key to reset the error |
|
|
| condition. |
|
|
|
|
| BUFFER OVERFLOW | A buffer overflow condition | Turn the printer off to clear the buffer. |
| CHARACTER LOST | occurred (if serial interface is | Press the ON LINE key to reset the error |
|
| selected). | condition. |
|
|
|
|
| DATA SET OFF | The printer detects a remote | Press the ON LINE key to clear the error |
|
| connection serial interface error. | condition. |
|
| The DST or DCD signal was not |
|
|
| sensed. |
|
|
|
|
|
| FRAMING ERROR | The stop bit is not detected on | Press the ON LINE key to clear the error |
| WRONG CHARACTER | complexion of the next | condition. |
|
| reception. |
|
|
|
|
|
|
|
|
|
117