First time installation

How to turn the set-top box on for the first time

When you have connected your set-top box to the TV (as described in the previous section), you are ready to use it.

1Switch on the TV.

2Set it to the input channel you have connected the set-top box to (AV1, for example).

3Switch the set-top box on at the mains supply.

4The power indicator on the front panel of the set-top box will light up red and will change to green as a picture is displayed. The set-top box will automatically use talking features to speak the setup instructions. You can switch this off by pressing the TF button on your remote control.

You need to set up your receiver. Please make

sure the aerial is connected then press OK to continue.

5This will be the ‘first-time installation’ title screen (shown above).

6Check your aerial is connected correctly and then press the OK button.

Full scan replace existing services

CN Name

Provider Type

No services stored

 

0%

100%

 

 

Please wait while scanning ... 9 minutes remaining

13

Goodmans GDB20TTS_Instruction Manual.indb 13

6/15/2010 4:26:29 PM

Page 13
Image 13
Goodmans GDB20TTS instruction manual How to turn the set-top box on for the first time, Full scan replace existing services