Getting started
Putting batteries in the remote control
The remote control needs two type AA batteries to power it. We have supplied these.
To replace the batteries
1Turn the remote control on to its front face to reveal the battery compartment cover (shown tinted in diagram below).
2Push and pull the cover in the direction of the arrows on the cover and slide it off to reveal the battery compartment.
3Remove the two batteries from the compartment and put them to one side. (You do not need to do this when you put batteries in for the first time.).
4Insert the two AA size batteries following the diagram printed around the compartments.
5Put the cover on the guides of the compartment and slide it closed. You will hear it snap closed.
Getting rid of the batteries
Make sure you get rid of the batteries safely. Never get rid of them in a fire or with household waste. Check with your local authority for regulations on this.
Goodmans GDB20TTS_Instruction Manual.indb 7
7
6/15/2010 4:26:27 PM
