Getting started

4Connect the RF cable (we have provided one) between the ‘RF out’ socket on the set-top box and the aerial socket on the DVD or VCR. Also connect a second RF cable between the DVD or VCR and the ‘aerial’ socket on the TV. These cables will allow you to watch TV programmes as you did before but with the set-top box connected.

5Connect a cable which has a Scart connector at each end (we have provided one) between the ‘TV’ socket on the back panel of the set-top box and the ‘Scart’ socket on your TV. If there is more than one ‘Scart’ socket on the TV, look in your TV instruction manual to check which one you should use.

6Connect a cable which has a Scart connector at each end (we have not provided this) between the ‘VCR or DVD’ socket on the back panel of the set-top box and the ‘Scart’ socket on your DVD or VCR.

7Plug the AC/DC adapter into a mains socket and then plug the connector on the adapter into the ‘5V DC in’ connector on the back panel of the set-top box as shown opposite.

8Plug the TV mains lead back into the mains socket.

How to connect headphones

Connect the 3.5 mm stereo jack plug on your headphones into the headphone socket on the back of the set-top box, see below.

5V DC IN

- +

AERIAL

RF OUT

VCR/DVD

TV

2.0A

12

Goodmans GDB20TTS_Instruction Manual.indb 12

6/15/2010 4:26:29 PM

Page 12
Image 12
Goodmans GDB20TTS instruction manual How to connect headphones