Service
Ensure that the black antenna wire is not positioned between the ribbon cables. Pull antenna away from the cable as shown. See FIG. 40.
FIG. 38
FIG. 39
FIG. 40
18.Assemble the covers (18 &19). Insert several of the screws to hold the cover halves together. Test the display and trigger by inserting a battery and power- ing on the unit. If display does not appear or trigger does not function:
•make sure that a charged battery (11) is being used.
•check that the connections from the new bezel (31) to the circuit board (112) are fastened cor- rectly and securely.
•check that all parts are repositioned securely and in the correct location.
•check that the trigger connection to the RF board (103) is fastened correctly and securely.
•check that the trigger switch is centered prop- erly and that no gaps have formed between the switch and circular indent.
19.If the display appears, test the trigger to be sure that both dispense settings work correctly. Replace the remaining screws (12) and (42) that hold the cover halves together. Torque all screws to 7 - 10 in. lbs.
309497L | 27 |
