Service

18.Insert the RF Board (103) into the meter cover (18). Make sure that the RF board (103) fits securely into the two slots (A). See FIG. 46.

101 A

103

FIG. 46

G

FIG. 48

Ensure that all meter parts are positioned securely and in the correct location. Ensure that all cables are routed correctly throughout the meter and will not be pinched or kinked when the halves are reassembled See FIG. 47 and FIG. 48.

Ensure that the black antenna wire is not posi- tioned between the ribbon cables. Pull antenna away from the cable as shown. See FIG. 49.

FIG. 47

FIG. 49

19.Slide the trigger assembly (13, 14, 22, 23, 35, & 36) onto the mounting peg on the right side of the new meter half (18). See FIG. 36.

30

309497L

Page 30
Image 30
Graco 249881, 246008 instruction manual Service