Configure Your Device
The first time you use your device, follow the
If you are using an ANT+ heart rate monitor, select Yes during the configuration to allow the heart rate monitor to pair (connect) with your device. See page 6 for more information.
The device uses your user profile to calculate accurate workout data.
Acquire Satellite Signals
To set the correct time of day and begin using the device, you must acquire GPS satellite signals. It may take a few minutes to acquire signals.
Getting Started
Note: To turn off the GPS receiver and use the device indoors, see page 19.
Note: You cannot acquire satellites in power save mode. To exit power save mode, press enter or quit.
1.Go outdoors to an open area. For the best reception, make sure the antenna of the device is oriented toward the sky.
Antenna location
2.Touch and hold training to enter training mode.
Forerunner 410 Owner’s Manual | 5 |