Appendix
Troubleshooting
Problem | Solution/Answer | |
The bezel is not | Unlock the bezel: press enter and quit simultaneously. Press | |
firmly on the bezel for the best results. Tap the outer ring on the | ||
responding to my taps. | ||
| bezel, not the inner ring near the watch face. | |
My device never gets | Touch and hold GPS. Make sure GPS is set to On. | |
Take your device outside and away from tall buildings. Remain | ||
satellite signals. | ||
stationary for several minutes. | ||
| ||
The battery gauge | Allow the device to fully discharge, and then fully charge it | |
does not seem | ||
(without interrupting the charge cycle). | ||
accurate. | ||
| ||
| Stay 10 m away from other ANT+ accessories while pairing. | |
The heart rate monitor, | Bring the device within range (3 m) of the sensor while pairing. | |
foot pod, or GSC 10 | Restart the scan for the accessory (see page 31). Make sure | |
will not pair with the | the accessory is sending data (for example, you need to be | |
device. | wearing the heart rate monitor). If the problem persists, remove | |
| the battery. Wait 30 seconds, and insert the new battery | |
The heart rate data is | See page 32. | |
inaccurate. | ||
| ||
Some of my data | The device overwrites the oldest detailed data if you do not | |
is missing from my | transfer it to your computer. Transfer data regularly to avoid | |
device. | losing data. |
40 | Forerunner 410 Owner’s Manual |