Graco 410 Foot Pod, menu, ANT+, stop, start, start, Settings, Foot Pod, Distance, Calibrate, Accessories, GPS Calibration, Distance Calibration

Foot Pod

Your device is compatible with the foot pod. You can use the foot pod to send data for your device when training indoors or when your GPS signal is weak or you lose satellite signals. The foot pod is on standby and ready to send data (like the heart rate monitor). You must pair the foot pod with your device (see page 31).

Calibrating the Foot Pod Calibrating your foot pod is optional and can improve accuracy. There are three ways to adjust the calibration: distance, GPS, and manual.

Distance Calibration

For best results, the foot pod should be calibrated using the inside lane of a regulation track. A regulation track (2 laps = 800 m) is more accurate than a treadmill.

Using Accessories

1.Touch and hold menu > select Settings > ANT+ > Accessories > Foot Pod > Calibrate > Distance.

2.Select a distance.

3.Press start to begin recording.

4.Run or walk the distance.

5.Press stop.

GPS Calibration

You must have GPS signals to calibrate the Foot Pod using GPS.

1.Touch and hold menu > select Settings > ANT+ > Accessories > Foot Pod > Calibrate > GPS.

2.Press start to begin recording.

3.Run or walk approximately 1000 m. The device informs you that you have traveled far enough.

Forerunner 410 Owner’s Manual 35