Grizzly instruction manual Set Up, Unpacking, G0500 Inventory

SECTION 5: SET UP

Unpacking

The Grizzly 8" Jointers are shipped from the man- ufacturer in a carefully packed crate and a card- board box. If you discover the machine is dam- aged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assistance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

The 8" Jointer is a heavy machine at approximate- ly 460 lbs. shipping weight. DO NOT move the machine by yourself

– you will need assis- tance and power equip- ment. Serious personal injury may occur if safe moving methods are not followed.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

	G0500 Inventory
•	Jointer Assembly w/Fence	1
•	Infeed Extension	1
•	Outfeed Extension	1
•	V-Belt M52	2
•	Handwheel	2
•	Handle	2
•	Dust Port 4"	1

•Hardware Bag #1

	—Combo Wrench 8/10MM	1
	—Combo Wrench 12/14MM	1
	—Allen Wrench 3MM	1
	—Allen Wrench 4MM	1
	—Allen Wrench 5MM	1
	—Phillips Head Screw 1⁄4"-20 X 1⁄2"	4
	—Flat Washer 1⁄4"	4
	—E-Clip	4
	—Jig Feet	2
	—Jig Rod	1
•	Hardware Bag #2
	—Lock Washers 3⁄8"	3
	—Hex Bolt 5⁄16"-18 x 1"	4
	—Flat Washer 5⁄16"	4
	—Special Mounting Bolts	3
•	Cutterhead Guard	1
•	Push Block	2
•	Stand Assembly w/Motor	1
• Stand Door Assembly w/Knob		1
•	Strain Relief	1
• Phillips Head Screw #10-24 x 11⁄4"		2
•	Flat Washers #10	2
•	Hex Nuts #10-24	2

Figure 7. G0500 Inventory.

-12- G0500/G1018/G1018HW 8" Jointers