Haier 3150 SA Model, Technical Data, Santoprene is a registered trademark of the Monsanto Co

316 SST, 3A Approved EPDM

316 SST, Santoprene®, Buna-N (Nitrile), fluoroelastomer,

3A Approved EPDM, PTFE

Model 3150

Model 3150

Technical Data

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . .

Air pressure operating range . . . . . . . . . . . . . . . . . . . . . .

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . .

Air consumption at 70 psi air inlet pressure/60 gpm. . . . .

Maximum free-flow delivery . . . . . . . . . . . . . . . . . . . . . . .

Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . .

* Gallons (Liters) per cycle . . . . . . . . . . . . . . . . . . . . . . . .

Maximum suction lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum size pumpable solids . . . . . . . . . . . . . . . . . . . .

120 psi (0.8 MPa, 8 bar)

20-120 psi (0.14-0.8 MPa, 1.4-8 bar) 175 scfm

50 scfm (see chart)

150 gpm ( 570 l/min)

145cpm

1.03(3.90)

Flapper 10 ft (3.5 m) wet, 5 ft (1.75 m) dry Ball 18 ft (5.5 m) wet, 9 ft (2.75 m) dry

Flapper 2.5 in. (63.5 mm)

Ball 1.0 in. (25.4 mm)

** Maximum Noise Level at 100 psi, full flow . . . . . . . . . . 90 dBa ** Sound Power Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 dBa ** Noise Level at 70 psi and 50 cpm . . . . . . . . . . . . . . . . . 85 dBa

Maximum fluid operating temperature is based on the	PTFE 220°F (104.4°C)
following maximum diaphragm, ball, and seat temperature Santoprene® 180°F (82.2°C)
ratings	Buna-N 180°F (82.2°C)
	fluoroelastomer 250°F (121.1°C)
	3A Approved EPDM 275°F (135°C)

Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 in. npt(f)

Wetted parts

***All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.

Wetted materials on all models. . . . . . . . . . . . . . . . . . . . .

Wetted material depending on model . . . . . . . . . . . . . . . .

CAUTION:

Santoprene® may be used only with non-fatty, non-oily foods or alcohols up to 15%.

Non-wetted external parts. . . . . . . . . . . . . . . . . . . . . . . . .

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

300 series stainless steel, polyester (labels), LDPE foam (gasket)

145 lb (66 kg)

Santoprene® is a registered trademark of the Monsanto Co.

Loctite® is a registered trademark of the Loctite Corporation.

*Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type.

**Noise levels measured with the pump mounted on the stand. Sound power measured per ISO Standard 9614-1.

***The pump user must verify that the construction materials meet their specific application requirements.

310622L 37