Charging Aux Batt LED Description
Blinking orange LED Battery charging at the maximum rate
Solid green LED | Trickle charging; battery pack is ready for use |
Back Panel
Auxiliary Battery Well (without battery inserted)
Configuration | Service Aux | Power Supply |
Switches | Battery Switch | Connector |
Auxiliary Battery Well Insert a battery into the well to charge a second battery and you will always have a spare. The auxiliary battery well can also service your battery pack.
Configuration Switches Use these switches to select the network and communications modes for your Dolphin. See Chapter 8 for more on the configuration switch settings. The configuration switches are checked at power up. Changes in the switch settings will not be recognized until power is turned off and then back on
Service Aux Batt Switch Press and hold this button for four seconds to service the battery in the auxiliary battery well. For maximum battery life, the battery should be serviced, or calibrated once a month. The Charging AUX BATT LED is red while the battery is discharging and changes to blinking red when the charging cycle begins. The battery is ready to use when the light turns green.
Power Supply Connector Use this connector to attach a power supply to the HomeBase. The power supply provides 12V DC input for communications and battery charging.
Dolphin® 7200 User’s Guide | 8 - 3 |
