Harman-Kardon AVR 7550HD owner manual Back Light, Punch-Through Programming, Remote Reset

ADVANCED FUNCTIONS

through the available characters. To move to the next character, either press the 3Button, or press the next desired Alphanumeric Key. Press the OK Button when you have finished.

To execute an activity, press the Activity Button, then the Alphanumeric Key you selected as the command button in Step 4. If you selected the AVR Power On or Off Button in Step 4, you do not need to press the Activity Button first.

To view the steps previously programmed for an activity without executing it:

1.Press and hold the AVR Settings Button for 3 seconds. The remote will enter Program mode, and its Main Menu will be displayed.

2.Use the 1/5 Buttons to scroll to the Activity option, and press the OK Button.

3.Use the 1/5 Buttons to select the Read Activity option, and press the OK Button.

4.Use the 1/5 Buttons to select the command button, and press the OK Button.

5.Use the 1/5 Buttons to scroll through the steps programmed into the activity. It is not possible to make any changes. When you have finished, press the OK Button or the Back/Exit Button to exit Program mode.

It isn’t possible to “edit” a command within an activity. To delete the activity:

1.Press and hold the AVR Settings Button for 3 seconds. The remote will enter Program mode, and its Main Menu will be displayed.

2.Use the 1/5 Buttons to scroll to the Activity option, and press the OK Button.

3.Use the 1/5 Buttons to select the Delete Activity option, and press the OK Button.

4.Use the 1/5 Buttons to select the command button or title, and press the OK Button. The activity, including any title you gave it, will be deleted.

5.Use the 1/5 Buttons to select the punch-through device (CBL/SAT in the example given in step 4), press the OK Button, and the Punch-Through programming will be saved.

To undo punch-through programming, follow the same steps as above, but select the same Source in Steps 4 and 5.

NOTE: The Volume and Mute controls are always dedicated to the AVR.

Back Light

The AVR remote is equipped with a back light to illuminate the keys and LCD Display to facilitate its use in a darkened home theater environment.

To turn the back light on or off at any time, press the Back Light Button.

The back light’s turn-on mode may be programmed:

•Normal: The back light stays off unless the Back Light Button is pressed.

•On Full: The back light will turn on any time a key is pressed.

In both modes, the back light will remain on for 5 seconds after the last button press, and then turn off automatically.

To program the remote’s back light mode:

1.Press and hold the AVR Settings Button for 3 seconds. The remote will enter Program mode, and its Main Menu will be displayed.

2.Use the 1/5 Buttons to scroll to the Back Light option, and press the OK Button.

3.Use the 1/5 Buttons to select the Normal or On Full option, and press the OK Button to finish.

Punch-Through Programming

The punch-through feature allows you to operate one component, while setting certain groups of controls to operate another component. For example, while using the AVR controls for surround modes and other audio functions, you may operate the transport controls of your DVD player. Or while using the remote to control video functions on your TV, you may use your cable box to change channels.

To program punch-through control while operating any device:

1.Press and hold the AVR Settings Button for 3 seconds. The remote will enter Program mode, and its Main Menu will be displayed.

2.Use the 1/5 Buttons to scroll to the Punch-Through option, and press the OK Button.

3.Use the 1/5 Buttons to select either Channel or Transport control, and press the OK Button.

4.Use the 1/5 Buttons to scroll to the device in use, and press the OK Button. For example, to change channels using the cable or satellite set-top box while using the remote to operate the TV, select the TV source in this step.

Remote Reset

To reset the remote to its factory defaults, erasing all product codes, learned codes, activities and other user programming:

1.Press and hold the AVR Settings Button for 3 seconds. The remote will enter Program mode, and its Main Menu will be displayed.

2.Use the 1/5 Buttons to scroll to the Remote Reset option, and press the OK Button. The process may take a few minutes, depending on the amount of user programming requiring erasure. Please wait until the “Remote Reset Complete” message appears before pressing any keys.

50