![](/images/new-backgrounds/1071097/7109751x1.webp)
Model OFE/OFG-321,322,323,324
2-22. AUTOLIFT ACTUATOR (MOTOR) REPLACEMENT
(if applicable) (Continued)
CUT WIRES
HERE
5.Disconnect actuator connector and cut the wires from the other half of the connector, as shown at left. The new actuator wires do not have a connector on them and must be connected directly to the wires on the unit.
6.Using a 3/8 socket, remove the 3 nuts securing the bottom of the actuator bracket.
7. Remove trim strip from front of shroud.
8.Using a 15T torx driver, remove the 4 torx screws from the pair of actuators.
606 |