Honeywell 1200g, 1202g Batch Mode Beep, Batch Mode Quantity, Entering Quantities, Beep Off, Batch Mode, Quantity Codes, Batch Mode Beep, * Batch Mode Off, Batch Mode Beep On

Default = Batch Mode Off.

* Batch Mode OffInventory Batch Mode

Automatic Batch Mode

[

Batch Mode Beep

When scanning in Batch Mode, the scanner beeps every time a bar code is scanned. When Batch Mode Beep is On, you will also hear a click when each bar code is sent to the host. If you do not want to hear these clicks, scan Batch Mode

Beep Off. Default = Batch Mode Beep Off.

* Batch Mode Beep OffBatch Mode Beep OnBatch Mode Quantity

When in Inventory Batch Mode (page 3-11),you may wish to transmit the number of multiple bar codes scanned, rather than a single bar code multiple times. For example, if you scan three bar codes called XYZ with Batch Mode Quantity Off, when you transmit your data it will appear as XYZ three times. Using Batch Mode Quantity On and the Quantity Codes

(page 3-12), you could output your data as “00003, XYZ” instead. Default = Batch Mode Quantity Off.

* Batch Mode Quantity Off

Batch Mode Quantity On

Entering Quantities

Quantity Codes (page 3-12) allow you to enter a quantity for the last item scanned, up to 9999 (default = 1). Quantity digits are shifted from right to left, so if a 5th digit is scanned, the 1st digit scanned is discarded and the 2nd, 3rd and 4th digits are moved to the left to accommodate the new digit.

For example, if the Quantity 5 bar code is scanned after the quantity has been set to 1234, then the 1 is dropped, the quantity will be 2345.

3 - 11