Scan Data allows you to scan bar codes and display the bar code data in a win- dow. Scan Data lets you send serial commands to the imager and receive imager response that can be seen in the Scan Data window. The data displayed in the Scan Data window can either be saved in a file or printed.
ConfigureConfigure displays the programming and configuration data of the imager. The imager's programming and configuration data is grouped into different catego- ries. Each category is displayed as a tree item under the "Configure" tree node in the application explorer. When one of these tree nodes is clicked, the right- hand side is loaded with the parameters' form belonging to that particular cate- gory. The "Configure" tree option has all the programming and configuration parameters specified for an imager. You can set or modify these parameters as required. You can later write the modified settings to the imager, or save them to a dcf file.
ImagingImaging provides all the
Note: Visual Xpress requires .NET software. If .NET is not installed on your PC, you will be prompted to install it during the Visual Xpress installation.
1.Access the Honeywell web site at www.honeywellaidc.com.
2.Click on the Resources tab. Select Product
3.Click on the dropdown for Select Product Number. Click on 4600g.
4.Click on the listing for Visual Xpress.
5.When prompted, select Save File, and save the files to the c:\windows\temp directory.
6.Once you have finished downloading the file, exit the web site.
7.Using Explorer, go to the c:\windows\temp file and unzip the file you saved.
8.Double click on Setup.exe and follow the screen prompts to install the Visual Xpress program.
9.If you’ve selected the defaults during installation, you can click on Start
11 - 5