Connecting the Imager with USB

Note: See "Imager Models" on page 1-2to determine which interfaces apply to your imager.

An imager can be connected to the USB port of a computer.

1.Connect the appropriate interface cable to the imager first, then to the com- puter.

2.Program the imager for a USB interface using the Plug and Play bar codes beginning on page 1-9.

3.The imager beeps.

4.Verify the imager operation by scanning a bar code from the Sample Symbols in the back of this manual.

For additional USB programming and technical information, refer to “USB Application Note,” available at www.honeywellaidc.com.

1 - 5