Wand Emulation Polarity
The polarity can be sent as standard with black bars high, or reversed with white bars high. Default = Black High.
* Black High
White High
Wand Emulation Idle
The idle describes the state of the imager when no data is being transmitted. When in Wand Emulation mode, you must set the imager’s idle state to match the idle state for the device to which the imager is connected. Default = Idle High.
* Idle High
Idle Low
Data Block Size
This transmits the data in smaller blocks to prevent buffer overflow. Default =
40.
20
* 40
60
80
6 - 5