Honeywell 4600rp, 4800i, 4600g/4600r Good Read Delay, User-SpecifiedGood Read Delay

LED flashes are in sync with one another. To change the number of beeps, scan the bar codebar code below and then scan a digit (1-9) bar code and the Save bar code on the Programming Chart inside the back cover of this manual. Default = One.

Number of Pulses

Good Read Delay

This sets the minimum amount of time before the imager can read another bar code. Default = No Delay.

*No Delay

Short Delay (500 ms)

Medium Delay (1,000 ms)

Long Delay (1,500 ms)

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar code below, then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside back cover, then scanning Save.

User-Specified Good Read Delay

3 - 3