Use the following codes to enable or disable
If you scan the Allow Concatenation code, when the imager sees the coupon code and the extended coupon code in a single scan, it transmits both as separate symbologies. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the imager must see and read the coupon code and extended coupon code in a single read to transmit the data. No data is output unless both codes are read.
Default = Off.
* Off
Allow Concatenation
Require Concatenation
<Default All UPC-E Settings>
UPC-E0
Most UPC bar codes lead with the 0 number system. To read these codes, use the
*
7 - 20