Telepen

<Default All Telepen Settings>

Telepen

On

* Off

Telepen Output

Using AIM Telepen Output, the imager reads symbols with start/stop pattern 1 and decodes them as standard full ASCII (start/stop pattern 1). When Original Telepen Output is selected, the imager reads symbols with start/stop pattern 1 and decodes them as compressed numeric with optional full ASCII (start/stop pattern 2). Default = AIM Telepen Output.

* AIM Telepen Output

Original Telepen Output

Telepen Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 7-2)for additional information. Minimum and Maximum lengths = 1-60. Minimum Default = 1, Maximum Default = 60.

Minimum Message Length

Maximum Message Length

7 - 17