Serial Wedge Data Transmission Port

Using the following bar codes, set the port to which you want the scanned data to transmit. Port 1 corresponds to P1 on the output cable and Port 2 corresponds to P2 on the output cable. Choosing Both sends scanned data to P1

and P2. Default = P1.

*P1

P2

Both P1 and P2

IBM 4683 Ports 5B, 9B, and 17 Connection

Note: See "Imager Models" on page 1-2to determine which interfaces apply to your imager.

Scan one of the following “Plug and Play” codes to program the imager for IBM 4683 Port 5B, 9B, or 17.

Note: After scanning one of these codes, you must power cycle the cash register.

IBM 4683 Port 5B Interface

IBM 4683 Port 9B

HHBCR-1 Interface

IBM 4683 Port 17 Interface

1 - 12