Video Reverse

Video Reverse is used to allow the imager to read bar codes that are inverted. The Off bar code below is an example of this type of bar code. If additional menuing is required, Video Reverse must be disabled to read the menu bar codes and then re-enabled after menuing is completed. Default = Off.

Note: Images downloaded from the unit will not be reversed. This is a setting for decoding only.

On

* Off

Working Orientation

Some bar codes are direction-sensitive. For example, KIX codes and OCR can misread when scanned sideways or upside down. Use the working orientation settings if your direction-sensitive codes will not usually be presented upright to the imager. Default = Upright.

Upright:

Rotate Code Clockwise 90°:

Upside Down:

Rotate Code

Counterclockwise 90°:

3 - 22