UPC-E0 Number System

The numeric system digit of a UPC symbol is normally transmitted at the beginning of the scanned data, but the unit can be programmed so it will not transmit it. To prevent transmission, scan Off. Default = On.

* On

Off

UPC-E0 Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2 Digit and 5 Digit Addenda.

2 Digit Addenda On

* 2 Digit Addenda Off

5 Digit Addenda On

* 5 Digit Addenda Off

UPC-E1

Most UPC bar codes lead with the 0 number system. For these codes, use UPC-E0(page 7-20). If you need to read codes that lead with the 1 number system, use the UPC-E1 On selection. Default = Off.

UPC-E1 On

* UPC-E1 Off

7 - 22