Back Panel, Powering the Dolphin HomeBase | Honeywell 7600 instruction

Back Panel

DC Power Jack

Pivot Connector

USB Port

Pivot Connector

This pivoting connector swivels 90 degrees. The default position is horizontal, with the connectors facing straight out the back panel. The pivot connector stops in both the horizontal and vertical positions, with the connectors facing out the bottom panel.

DC Power Jack

Connect the power cable to this power jack; see Powering the Dolphin HomeBase on page 8-3.

USB Port

This USB port is full-speed (v1.1). Using the USB cable, you can connect the HomeBase to a USB-compliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft ActiveSync (v.4.1 or higher). For more information about ActiveSync setup, see ActiveSync Communication on page 6-3.

Note: You can also purchase a serial HomeBase with a standard DB9 connector for RS-232 communication.

Powering the Dolphin HomeBase

The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Hand Held Products convert the voltage appropriately.

	The same power cable that ships with each terminal can be used	Plug Adapter
	to power the HomeBase. This cable contains a plug adapter for	Plug Adapter
		1
	each geography (US, UK, EU, etc.).	1
	1. Attach the appropriate plug adapter to the power adapter.	Power Adapter
		Power Adapter

2. Plug the power cable into the power source.

3. Plug the connector into the DC power jack on the back panel.	Power Cable
The HomeBase is now powered.

When a terminal is properly seated in the terminal well, the HomeBase powers the terminal, charges the terminal’s main battery pack, and launches ActiveSync (see ActiveSync Communication on page 6-3).

Hand Held Products recommends that you leave the HomeBase connected to its power source at all times, so that it is always ready to use.

Dolphin® 7600 User’s Guide	Rev D	8 - 3
	11/20/2007

Image 81

Honeywell 7600 manual Back Panel, Powering the Dolphin HomeBase, Pivot Connector, USB Port

Contents

User’s Guide With Microsoft Windows CE Trademarks Disclaimer Table of Contents Using the Image Engine Dolphin Mobile Mount Rev D Agency Approvals Dolphin 7600 Terminals with 802.11b/g and/or BluetoothLabel Locations Molded-in Text Laser Safety Label Regulatory and Safety Approvals for all Dolphin TerminalsLED Safety Statement Parameter Specification Dolphin RF Terminal-802.11b/g and/or Bluetooth FCC ComplianceFCC RF Radiation Exposure Statement Canadian Compliance TTE Compliance Statement-802.11b/g and/or BluetoothFor European Community Users Waste Electrical and Electronic Equipment Information Microwaves Rev D Out of the Box Getting Started Icons in the Command Bar Command BarDesktop Status Icon Meaning Using the Stylus Selecting ProgramsPop-Up Menus Using Windows Explorer Standard Terminal Configurations Terminal Hardware OverviewDolphin 7600 Wpan Dolphin 7600 WPAN/WLAN Front Panel Features Display Backlight Removing the Screen Protector Using Screen Protectors Credit Card Installing Your Screen Protector Releasing Paper Screen Calibration tab Back Panel Features Side Panel Features Installing Memory Cards Top Panel FeaturesAccess Door Image Engine Window Dolphin 7600 User’s Guide Rev D 11/20/2007 Bottom Panel Features ConnectorHand Strap Slot Using the Accessory Attachment Attaching a Belt ClipAttaching the Hand Strap Dolphin 7600 Peripherals Dolphin 7600 Accessories Main Battery Pack Battery Power Managing Main Battery Power Guidelines for Battery Use and DisposalStorage Guidelines Charging Internal Backup Battery Suspend Mode Resetting the Terminal Tap Start Settings Control Panel Memory tab Care and Cleaning of the Dolphin TerminalTap Start Settings Control Panel double-tapFormat Ipsm Changing the Memory Allocation Dolphin 7600 Terminal Technical Specifications Weight DimensionsConstruction Structural Rev D Overview Using the KeyboardsSuspend/Resume Suspend Modifier Keys Function Keys Icon Keyboard Status Alpha/Numeric Indicator Key Numeric Keyboard Navigation KeysKey Description Buttons Column Matching Hardware Button P1-P4 Hardware Application ButtonsLeft Right Alpha Mode Numeric ModeToggling Between Alpha and Numeric Modes Key Shift Functionality in Numeric Mode Key Blue Key Combinations Alpha ModeKey Character Uppercase Double-tap SFT Functions Key Red Key Combinations Key Alpha Keyboard Shift Functionality in Alpha Mode Key Red Key Combinations Key NUM Lock Mode Rev D Using the Image Engine Available Image EnginesDepth of Field Symbology Type Symbology Name 1D Symbologies Supported Bar Code Symbologies2D Symbologies Composite Codes Activating the Engine Using DemosDecoding LEDs Omni-Directional Scanning Positions Sample Bar Codes Capturing Images Taking an ImageUploading Images Rev D Installing Additional Software CommunicationCommunication Options Connecting the Power Cable Connecting the USB Cable Setting Up the Host Workstation Hardware Requirements for SetupActiveSync Communication Communication Types Communicating with the Dolphin Terminal Setting Up the Dolphin TerminalSynchronizing with the Host Workstation Exploring the Terminal from the Workstation If the File is an Installer If the File is Not an InstallerAdding Programs via ActiveSync Connecting the Terminal to a Wireless Network Wireless RadiosConfiguring the Wlan Radio Wlan 802.11b/g Radio Adding Programs From the Internet Transferring Files and Information Infrared CommunicationIrDA Port Location Tap Beam File Tap Start Programs Beam File Tap Start Control Panel ActiveSync Using ActiveSync for IrDA Communication Rev D Enabling the Bluetooth Radio Bluetooth ManagerTab Window Description See About BT Service Tab Setting Tab Serial Port Tab Service on another device Connecting to Bluetooth Printers Select Serial Printer and tap OK Rev D Connecting to Other Bluetooth Devices Scan Device Window Service Found device contains the following service Icon Popup Menu Tap Start Settings Control Panel double-tapActiveSync Bluetooth ActiveSync Dolphin HomeBase Terminal Well Front PanelDock LED Rubber Feet Pivot Connector Powering the Dolphin HomeBaseBack Panel USB Port Checking Battery Power Charging the Main BatteryControl Panel double-tapPower Inserting a Terminal Back Panel Dimensions Mounting the Dolphin HomeBaseMounting Guidelines Bottom Panel Dimensions Dolphin HomeBase Technical Specifications Rev D Dolphin QuadCharger Power LEDCharging Slots Status LEDs Supplying Power to the QuadCharger Power Supply ConnectorPower Switch Inserting and Removing Battery Packs Battery ChargingTemperature Recommendations for Storing Batteries DIN Rail Dimensions Bottom Panel Mounting DimensionsMounting the QuadCharger Mounting Location Problem Issue Troubleshooting Dolphin QuadCharger Technical Specifications Out of the Box Dolphin Mobile Mount Rev D Mounting Rev D Online Product Service and Repair Assistance Product Service and Repair Technical Assistance Online Technical Assistance For Further InformationNorth America/Canada How to Extend Your Warranty Limited Warranty Rev D Page Hand Held Products, Inc