Honeywell 7600 manual Charging the Main Battery, Inserting a Terminal, Checking Battery Power

Models: 7600

1 102
Download 102 pages 42.13 Kb
Page 82
Image 82

Charging the Main Battery

The HomeBase powers the terminal and fully charges its main battery pack in less than four hours.

As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage.

Inserting a Terminal

1.Install the battery pack in the terminal; see Install the Main Battery on page 2-1.

2.Power the Dolphin HomeBase; see Powering the Dolphin HomeBase on page 8-3.

3.Slide the terminal into the terminal well until the Dock LED lights green to indicate that the terminal is properly seated.

4.The battery pack begins charging.

Checking Battery Power

To check battery power while the terminal is operating, tap Start > Settings

> Control Panel > double-tapPower

.

8 - 4

Rev D

Dolphin® 7600 User’s Guide

 

11/20/2007

 

Page 82
Image 82
Honeywell 7600 Charging the Main Battery, Inserting a Terminal, Checking Battery Power, Control Panel double-tapPower