Honeywell 99EX Menu, Setup, Apply, Setup, Status, Status, Profile, About Tab, Profile Tab, Gobi Settings, Radio Power ON, Start Data Session, Auto Start Data Session

Profile Tab	The Profile tab allows you to see Radio capability
	information and network statistics including:
	• Radio Hardware and Software versions
	• Radio and SIM identification numbers
	• Serving network connection type and state
	• Available radio interfaces for the current serving
	network

About Tab Displays copyright and version information for the Gobi Connection Manager.

Establishing Data Communication

1. Tap on the Home screen to access the Dolphin Wireless Manager.

2.Tap Menu and then select Gobi Settings.

3.From the Setup tab, select the carrier and enter user information (GSM only).

Note: An installed SIM card is required and the SIM slot option must be set to 0.

4.Check the Auto Start Data Session checkbox to automatically start the data session.

5.Tap the Apply button. The Connection Manager automatically switches to the Status Tab.

6.Tap the Radio Power ON button.

7.When the radio connects to the network, the status changes to “Registered” and a signal strength is displayed.

8.If Auto Start Data Session was checked on the Setup tab, the state automatically changes from “Registered” to “Data Session Open” and an IP address appears. If Auto Start Data Session was not selected, then the Data session can be started manually by tapping Start Data Session button from the Status tab.

9 - 14