Front Panel

Terminal Lock (not in view)

Terminal Well

Terminal Lock

 

Volume Control Dial

Ball Joint

for Mounting

(not in view)

Bracket

 

Status LED

 

USB

Speaker

Communications

Port

 

Mounting Bracket

Used to mount the base to a fixed location.

Speaker

Amplifies the Dolphin’s audio signals.

Status LED

Illuminates solid green when the Dolphin terminal is properly seated in the terminal well.

Terminal Locks

The mobile base has a locking switch on the left and right side. Pushing one of the switches up locks the terminal in the base. To unlock the terminal push either switch down.

Terminal Well

Place the terminal in this well. Once seated, the terminal can communicate with a host device and its main battery pack begins charging.

USB Communications Port

This USB Port is host Hi-Speed 2.0v compliant. You can connect the base to a peripheral device, such as a memory stick or to a printer using a USB cable. When the terminal is seated in the terminal well, it is connected to the peripheral device via the base.

Volume Control Dial

The speaker volume is adjusted via the dial located on the side of the base.

14 - 2