Mounting the QuadCharger

The charger should be on a dry, stable surface and can be mounted on a flat, horizontal surface such as a desktop or workbench. When choosing a location, always bear in mind that:

•the mounting location must allow users easy access to the power connector.

•the charger should be oriented so that users can easily insert and remove battery packs and see the LEDs.

Bottom Panel

3.94in. [10 cm]

Optional Mounting Holes for M3 Self-Tapping Screws, Qty. 4

DIN Rail Slot

Rubber Feet,

Qty. 4

3.66in. [9.3 cm]

Desk Mounting

The DIN rail slot on the bottom panel enables secure mounting to a horizontal surface.

Hardware Required

•3/16 in. dia x 5/8 in. long pan head screw

•1/2 in. OD x 7/32 in. ID x 3/64 in. thick

•3/16 in. dia nut

Installing the DIN Rail

1.Slide the DIN rail into the DIN rail slot (7.5 X 35 mm) on the bottom of the QuadCharger.

2.Then, using the appropriate nuts and bolts listed above, secure the DIN rail to the desktop.

DIN Rail

17 - 4