Capacity

The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack independently of the terminal well. This means that one base can charge two battery packs: the one installed in the terminal and a spare.

!We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.

!We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honey- well peripherals, cables, or power adapters may cause damage not covered by the warranty.

Parts and Functions

Front Panel

Terminal Well

Auxiliary Battery Well

Power/Dock LED

COMM LED

AUX Battery LED

Terminal Well

Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The base completely charges the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. If the host device is a workstation that uses ActiveSync, synchronization begins immediately.

Auxiliary Battery Well

See Auxiliary Battery Well on page 12-4.

Power/Dock LED

Indicates if power is supplied to the HomeBase and if a terminal is docked properly in the base.

This colormeans…

Red

The HomeBase has power but no terminal is docked.

Green

The HomeBase has power and the terminal is properly seated in the base.

12 - 2