2.Attach the channel bracket to a dry, stable surface using the hardware listed on page 15-9for the appropriate mounting surface.

Mounting into Wood Stud

 

Wahser, Qty. 4

Channel Bracket

Lag Bolt, Qty. 4

 

Minimum

16 in. (40.64 cm)

Mounting into Hollow Surface

Washer, Qty. 4

Toggle Nut, Qty. 4

Toggle Bolt, Qty. 4

Channel Bracket

Minimum

16 in. (40.64 cm)

3.Align the mounting holes on the wall bracket with the spring nuts installed in the channel bracket. Secure the wall bracket in place using the cap screws listed on page 15-9.

4.See Securing the Base to the Wall Bracket (page 15-7)for detailed instructions on securing the ChargeBase to the wall bracket.

15 - 10